Act 174 of 2016 establishes a new set of municipal and regional energy planning standards, which if met allow those plans to carry greater weight - substantial deference - in the Section 248 siting process for energy generation. Meeting the standards is entirely voluntary; if regions and municipalities do not wish to update their plans, they will continue to receive due consideration in the Section 248 process. A descriptive flow chart is available here.
The final standards for regional plans and muncipal plans are below. Along with the standards, the Department is also publishing a set of recommendations from the 2016 Comprehensive Energy Plan (CEP), tailored to local and regional action, with which municipal or regional plans are expected to be consistent. The 2016 CEP, which was published prior to Act 174, was not crafted with this use in mind. As a result, certain general recommendations that apply to all levels of government, and to the public as a whole, were removed. In order to address this mismatch, these standards are accompanied by this modified set of CEP recommendations, which are expected to be expanded upon in the guidance discussed below.
Overview document (please read first)
The detailed standards for regional plans, in checklist form with instructions and guidance, are available here. A form-fillable version that can be completed and submitted to the Department is available here. An abridged version containing the standards alone (with no narrative) is available here.
The detailed standards for municipal plans, in checklist form with instructions and guidance, are available here. A form-fillable version that can be completed and submitted to the Department or regional planning commission is available here. An abridged version containing the standards alone (with no narrative) is available here.
III. Recommendations & Guidance
The recommendations from the 2016 CEP that are relevant to regions and municipalities are available here. In addition, the Department has created guidance documents and various workbook aids for regions and municipalities, available below.
- Guidance for Regional Plans
- Guidance for Municipal Plans
- Workbook Tools README
- Municipal Consumption Template
- Analysis & Targets Aid Region Bottom Up
- Analysis & Targets Aid Region Top Down
- Analysis & Targets Aid Municipality
- Generation Scenarios Aid
The Vermont Center for Geographic Information (VCGI) has created this "Act 174 Portal" with links to GIS shapefiles for all of the Known and Possible constraint layers referenced in the standards.
Northwest Regional Planning Commission, with input from all 11 RPCs in the state, has created a best practices and resources guide for municipalities to use when undertaking enhanced energy planning, which is available here.
IV. Plans Submitted for a Determination of Energy Compliance
- Bennington County Regional Commission
- Town of New Haven
- Northwest Regional Planning Commission
- Two Rivers-Ottauquechee Regional Commission
- Town of Benson
- Town of Sudbury
- Windham Regional Commission
- Northeastern Vermont Development Association
V. Plan Review Process
For plans submitted to the Department for a determination of energy compliance, the following outlines the general process:
- Regional Planning Commissions and Municipalities coming directly to the Department may request a pre-review of their draft plan.
- Regional or municipal plans and requests for determination of energy compliance should be submitted to the Department of Public Service through the PSD.PlanningStandards@vermont.gov e-mail address. Please submit all required elements (i.e. checklist, plan, and any supporting documentation such as memo/planning commission report discussed in "Plan Adoption Requirement" section of standards checklist).
- The Department will work with the Town or RPC to schedule a public hearing that will be notified 15 days in advance.
- The Department will issue an approval or denial within the two-month review period. If a negative determination is issued, a memo stating the reasons for denial will be provided to the municipality or RPC.
- Municipalities or RPCs may re-submit after correcting the reasons for denial noted in the memo.
- If a municipality or RPC re-submits their plan, the Department will issue an approval or denial within 45 days.
- Municipalities or RPCs may appeal a decision of the Department to the Natural Resources Board within 30 days.
VI. Background on Standards Development
On August 30, 2016, the Department hosted a forum at the Vermont College of Fine Arts to gather input on the development of energy planning standards pursuant to Act 174.
- Act 174 Energy Planning Standards Forum Press Release
- Act 174 Energy Planning Standards Forum Presentation
The Department published a draft of the determination standards for comment on September 26, 2016 following an extensive period of stakeholder and public input throughout the summer, including topic-specific roundtables, a cross-cutting forum, and a survey. On October 11, 2016, the Department held a public hearing on the draft standards at the Chandler Music Hall in Randolph, Vermont.
- Comments received on draft standards
- Public Hearing Press Release
- Public Hearing Presentation
- Public Hearing Transcript
VII. Submitting a Plan for a Determination of Energy Compliance
Please see the instructions contained in the detailed standards for either regions or municipalities, above. Questions may be sent to: PSD.PlanningStandards@vermont.gov.